BWMGD - PVC AND CPVC PRIMER
- MSDS: BWMGD
- Manufacturer: HERCULES CHEMICAL CO INC
- Product Name: PVC AND CPVC PRIMER
- National Stock Number: 8040-01-004-2705
Product Identification
Product ID:PVC AND CPVC PRIMER
MSDS Date:03/27/1989
FSC:8040
NIIN:01-004-2705
MSDS Number: BWMGD
Responsible Party
NEW YORK, NY 10018-5595
US
Emergency Phone: 212-869-4330 X226
Info Phone: 212-869-4330 X226
Cage: 84794
Contractor
Telephone: 804-873-6500
Cage: 3P768
Ingredients
TETRAHYDROFURAN (SARA III)
CAS: 109-99-9
RTECS: LU5950000
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM/250STEL;9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM/300STEL 9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
CYCLOHEXANONE (SARA III)
CAS: 108-94-1
RTECS: GW1050000
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:TLV FOR CYCLOHEXANONE IS 25PPM
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:CORROSIVE.MAY CAUSE
IRRITATION.SKIN:CORROSIVE.MAY CAUSE IRRITATION AND DEFATTING.MAY BE
DERMALLY ABSORBED IN HARMFUL AMOUNTS.INGEST:MAY CAUSE GI TRACT
IRRITATION.INHAL:MAY CAUSE RESPIRATORY IRRIT ATION AND CNS EFFECTS.
Explanation of Carcinogenicity:THERE ARE NO INGREDIENTS ABOVE 0.1%
WHICH ARE IDENTIFIED AS CARCINOGENS BY NTP,IARC OR OSHA.
Effects of
Overexposure:INHAL:NARCOSIS,HEADACHE,DIZZINESS,COUGHING,NAUSEA.EYES
:BURNING.SKIN:DERMATITIS.
Medical Cond Aggravated by Exposure:NOT REPORTED.
First Aid
First Aid:SKIN:REMOVE CONTAMINATED CLOTHING;WASH WITH SOAP AND
WATER.EYES:FLUSH WITH WATER FOR 15 MINUTES.INHAL:REMOVE TO FRESH
AIR.GIVE OXYGEN OR ARTIFICIAL RESPIRATION IF NEEDED.INGEST:DO NOT
INDUCE VOMITING. GET PROMPT QUALIFIED MEDICAL ATTENTION.IF
CONSCIOUS,GIVE 2 GLASSES OF WATER.
Fire Fighting
Flash Point Method:TCC
Flash Point:6F,-14C
Lower Limits:2
Upper Limits:11.8
Extinguishing Media:FOAM,DRY CHEMICAL,CARBON DIOXIDE.A DIRECT STREAM OF
WATER MAY SPREAD BURNING LIQUID.
Fire Fighting Procedures:USE A SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE EQUIPMENT.COOL FIRE EXPOSED CONTAINERS WITH WATER
FOG.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR,CAN TRAVEL
DISTANCES ALONG THE GROUND,AND FLASHBACK AT THE SOURCE.CONTAINERS
MAY BURST.DECOMPOSITION PRODUCTS ARE TOXIC.
Accidental Release
Spill Release Procedures:ELIMINATE SOURCES OF IGNITION.USE PROPER
RESPIRATORY AND PROTECTIVE EQUIPMENT.VENTILATE AREA.SOAK UP WITH A
NON-COMBUSTIBLE INERT ABSORBANT(CLAY,SAND);PLACE IN A SEALED METAL
CONTAINER FOR DISPOSAL.CL EAN SPILL AREA WITH WATER.
Neutralizing Agent:NOT APPLICABLE.
Handling
Handling and Storage Precautions:STORE IN A COOL,DRY,WELL-VENTILATED
PLACE.KEEP CONTAINER CLOSED WHEN NOT IN USE.KEEP AWAY FROM
HEAT,SPARKS,FLAMES AND INCOMPATIBLE MATERIALS.
Other Precautions:FOLLOW LABEL DIRECTIONS.AVOID BREATHING VAPORS.AVOID
SKIN AND EYE CONTACT.
Exposure Controls
Respiratory Protection:WHERE ENVIRONMENTAL CONTROLS ARE LACKING OR IN
ENCLOSED SPACES USE EITHER A SELF-CONTAINED BREATHING APPARATUS OR
A NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC VAPORS,DEPENDING ON
THE AIRBORN CONCENTRA TION.
Ventilation:USE LOCAL EXHAUST.
Protective Gloves:PVA
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING,AS NEEDED.PROVIDE A
LOCAL EYE WASH STATION AND SAFETY SHOWER.
Work Hygienic Practices:USE REASONABLE CARE IN HANDLING THIS
PRODUCT.WASH HANDS AFTER USE AND BEFORE EATING.
Supplemental Safety and Health
**EXPLOSIVE PEROXIDES MAY FORM WHEN THIS PRODUCT EVAPORATES TO
DRYNESS**
Chemical Properties
HCC:F5
Boiling Pt:B.P. Text:151F,66C
Vapor Pres:70
Vapor Density:3
Spec Gravity:0.851
Viscosity:LOW
Evaporation Rate & Reference:5 (N-BUTYL ACETATE=1)
Solubility in Water:APPRECIABLE
Appearance and Odor:LIQUID;PURPLE;ETHER/ACETONE-LIKE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH HEAT,SOURCES OF IGNITION.
Hazardous Decomposition Products:CARBON DIOXIDE,CARBON MONOXIDE.
Conditions to Avoid Polymerization:AVOID EXPOSURE TO AIR AND CATIONIC
INITIATORS(EG.LEWIS BASES).
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL,STATE AND
LOCAL REGULATIONS.HMIS SUGGESTS EPA CODE D001(IGNITABLE).
======================================================================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.